SC Automation Limited
SC Automation Limited
Add to Cart
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs.
The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
200155-AA-BB
| A: Mounting Stud Option |
|
| 00 | No mounting stud provided |
| 01 | 3/8-24 thread, 2 adhesive mount frames with adhesive |
| 02 | 3/8-24 to 3/8-24 UNF 1-3/8 inch hex plate stud |
| 03 | 3/8-24 to 1/2-20 UNF 1-3/8 inch hex plate stud |
| 04 | 3/8-24 to 1/4 NPT 1-3/8 inch hex plate stud |
| 05 | 3/8-24 to 1/4 NPT 1-3/8 inch hex plate stud |
| 06 | 3/8-24 to 1/4 NPT, 3/4 inch hex stud |
| 07 | 3/8-24 to 3/8 NPT, 3/4 inch hex stud |
| 08 | 3/8-24 to 1/2 NPT 1 inch hex stud |
| 09 | 3/8-24 to 3/4 NPT, 1-1/4 inch hex stud |
| 10 | 3/8-24 to 1 NPT, 1-3/8 inch hex stud |
| 11 | 3/8-24 to 1-1/4 NPT, 1-3/4 inch hex stud |
| 12 | 3/8-24 to 1/4-20 UNC, 3/4 inch hex stud |
| 13 | 3/8-24 to 5/16-18 UNC, 3/4 inch hex stud |
| 14 | 3/8-24 to 3/8-24 UNF, 3/4 inch hex stud |
| 15 | 3/8-24 to 3/8-16 UNC, 3/4 inch hex stud |
| 16 | 3/8-24 to 1/2-13 UNC, 3/4 inch hex stud |
| 17 | 3/8-24 to 3/8-16 UNC 1-3/8 inch hex plate stud |
| 18 | 3/8-24 to M8x1 1-3/8 inch hex plate stud |
| 19 | Quick-Set XDCR adapter, 1-inch hex stud |
| 20 | 3/8-24 thread, 1 magnetic mount base |
| 21 | 3/8-24 outer diameter to M6x1 inner diameter 1-3/8 inch hex plate stud |
| 22 | 3/8-24 to M8x1.25 1-3/8 inch hex plate stud |
| 23 | 3/8-24 to M16x2.0 1-3/8 inch hex plate stud |
| B: Approvals | |
| 05 | Multiple Approvals (CSA, ATEX, and IECEx) |
